1000A AC Clamp Meter with Temp. ( HTC – CM-2070C )

Description

1000A AC Clamp Meter with Temp. ( HTC – CM-2070C )

The HTC CM‑2070C Digital AC Clamp Meter is engineered as a robust and versatile diagnostic tool for electricians, HVAC engineers, field technicians, and maintenance professionals. Combining True RMS AC measurement, comprehensive multi-function testing, and a rugged ergonomic design, this clamp meter offers accurate performance in demanding electrical environments.

At the heart of its utility is the True RMS clamp current measurement capability—it handles AC currents up to 1000 A with high accuracy. Featuring a jaw aperture of 52 mm, the meter enables non-contact current readings on large conductors without needing to break circuits, ensuring safety and convenience in industrial and commercial setups. Within the 200 A range, accuracy is maintained at ±(2.0% + 5 digits); in the 1000 A range, resolution is 1 A for precise large-load monitoring.

Measurement extends beyond current. The CM‑2070C supports both DC voltage up to 1000 V and AC voltage up to 750 V, rendering it ideal for testing line voltage, control panels, switchboards, and electrical installations. DC voltage accuracy reaches ±(0.5% + 5 digits) on low ranges and ±(1.0% + 5 digits) on the 1000 V setting. AC voltage remains accurate at ±(1.0% + 5 digits), ensuring consistent readings across common voltage scenarios.

The meter also measures resistance across six auto-ranging bands—from 200 Ω to 20 MΩ—with resolution down to 0.1 Ω and accuracy up to ±(0.8% + 5 digits). The built-in continuity tester emits a buzzer when resistance falls below ~50 Ω, making fault detection easier. It supports diode testing as well, with forward voltage detection and audible feedback.

Temperature measurement is handled via an included Type-K thermocouple sensor, covering ranges from –40 °C to 1000 °C (or 0–1832 °F), with fine 1-degree resolution and accuracy of ±(1.0% + 5 digits) below 400 °C, and ±(1.5% + 5 digits) above. This capability allows the meter to serve dual-duty as both an electrical clamp meter and a temperature diagnostic instrument.

A noteworthy feature is the integrated Non-Contact Voltage (NCV) detection, which provides visual and audible warnings when a live AC voltage source is nearby. This adds a critical safety layer for users performing inspections near energised wiring or panels.

For visibility and ease of use, the CM‑2070C comes with a backlit 3½‑digit LCD display (1,999‑count, digits approx. 20 mm tall) and a built-in clamp torch light focused at the jaw opening—enabling accurate readings in dark or cramped spaces.

Intuitive operation is supported by practical features such as auto-ranging/manual-ranging switching, Data Hold, and MAX/MIN recording for capture of fluctuation extrema. The meter also offers Relative (REL) mode to zero baseline readings, and includes auto power-off after roughly 15 minutes of inactivity, preserving battery life. A low battery indicator appears when voltage drops below service threshold.

Safety and protection are enhanced through full-function overload protection, input breaker limits, and compliance with IEC 1010 CAT III (600 V) standards. The unit is certified to withstand typical testing environments—with input safeguarding across all measurement functions.

Performance stability is assured by dual-integral A/D converter circuitry, driven by a microprocessor-based system for rapid and accurate signal conversion. It samples about 3 times per second, balancing responsiveness with stable reading display.

Constructed for portability and durability, the CM‑2070C weighs approximately 280 g (including two AAA batteries) and measures 123 × 270 × 35 mm (H × W × D), making it compact enough for grip-hand and toolbox use.

he meter includes a full accessory bundle—test leads, TP‑01 temperature probe, carrying bag, AAA batteries, and a user manual—allowing immediate deployment on-site or in the lab.

Applications

This clamp meter is ideal for:

• Non-contact AC current measurement up to 1000 A in power systems, motor control panels, and switchgear.

• Voltage checks across DC/AC circuits up to 1000 V/750 V.

• Resistance and continuity testing in wiring runs, load circuits, and panel setups.

• Temperature monitoring during motor winding checks, HVAC diagnostics, or routine maintenance.

• Safe live-wire detection via NCV before probe testing.

• Recording peak and minimum values during current or voltage fluctuation events.

In summary, the HTC CM‑2070C Digital AC Clamp Meter merges precision, safety, and full-featured functionality in a portable design. With its True RMS capabilities, NCV detection, temperature sensing, and user-friendly interface, it serves as an essential tool for professionals involved in electrical inspection, HVAC servicing, maintenance, and diagnostics. Reliable, accurate, and compact—this clamp meter is designed to perform in real-world environments with confidence and convenience.

Japsin Instrumentation – Since 1974